Laser Industry News — November 20, 2026: Canada Extends Chinese Steel Relief, a 14 cm Laser Weld, Physical AI for Robots, Stainless Rebounds
Canada extended its tariff remissions on certain Chinese steel and aluminium products to December 31, 2028 and added 32 items to the list, in exchange for Chinese relief on about CAD 400 million of Canadian farm and seafood exports. TRUMPF and RWTH Aachen welded 14 cm of steel in a single pass, more than double the 6 cm laser benchmark. Lincoln Electric put a physical AI platform on the welding robot and Comau cut spot gun repair time from 30 minutes to 10. China's 304 stainless rose 200 CNY a week to 14,400 per tonne in Wuxi as nickel jumped 3.75%.
1. Canada extends Chinese steel and aluminium relief to 2028 and adds 32 items
Prime Minister Mark Carney met President Xi Jinping in Shenzhen on November 17. The two sides extended the Preliminary Joint Arrangement on bilateral economic and trade issues.
On metals, Canada agreed to extend by two years the remission measures that were due to expire at the end of 2026. That carries them to December 31, 2028.
Coverage widens as well. Canada will add 32 steel and aluminium tariff items where, in the government's own wording, Canadian supply is insufficient or unavailable. Steel Market Update counts 23 steel lines and nine aluminium lines.
Canada got something back. China will give extra tariff relief on about CAD 400 million of Canadian exports: CAD 116 million of frozen pork cuts and CAD 285 million of fish and seafood, including frozen cold-water shrimp and prawns, geoduck and other molluscs, sea cucumber and Greenland halibut.
Ottawa also put a number on the wider repair. Since the partnership started in January 2026, Canada says it has restored market access for more than 90% of the trade that was under tariff action, nearly CAD 7.5 billion of Canadian exports.
Read the remission correctly. It is not a repeal of Canada's surtax on Chinese steel and aluminium, which dates from October 2024. A remission lets a Canadian importer apply for relief on a named line. If your item is not listed, or your buyer does not file, the duty still applies at the border.
| Benchmark | Level (USD/t) | Change | As of |
|---|---|---|---|
| China HRC, FOB | 483 | Flat | Nov 18 |
| China medium plate, FOB | 528 / 532 | Flat | Nov 18 |
| China slab, FOB | 463 / 473 | Flat | Nov 18 |
| Turkey HRC | 690 | +10 | Nov 18 |
| Turkey medium plate | 730 | +10 | Nov 18 |
| US Midwest HRC, FCA | 1,230 | Flat | Nov 18 |
| Korea SS400 HRC | 551 | Flat | Nov 18 |
| Middle East HRC, CFR | 597 | Flat | Nov 18 |
| North Europe / Italy HRC, EXW | 810 | Flat | Nov 18 |
| Iron ore, spot reference | About 90 (soft) | - | Nov 18 |
Why it matters for us: the remission list is now a sales document. A Canadian fabricator that cannot buy plate or aluminium from a domestic mill can import from China without the surtax, but only on the listed lines, and only if it files. Ask your buyer to check the item number against the 32 additions before you quote, and keep the metal leg of the offer separate from the machine. If the metal is aluminium alloy sheet, the exemption decision lands on that line, not on the machine.
2. TRUMPF welds 14 cm of steel in one pass, more than double the old limit
TRUMPF published the result on November 9 together with research partners from RWTH Aachen University.
The team joined steel to a depth of 14 cm, or 5.51 inches, in a single welding pass. Comparable laser processes had reached 6 cm, or 2.36 inches. That is more than double, not a marginal gain.
The process is laser welding in a vacuum, LaVa. A 50 kW TRUMPF laser runs through BrightLine Weld beam shaping, which spreads the energy across the spot and holds the keyhole stable. Ambient pressure drops to 50 mbar.
50 mbar is the part worth understanding. Electron beam welding needs a high vacuum and a chamber built to match. LaVa needs a rough vacuum, which is cheaper to build, faster to pump and easier to load. That is what makes it a shop-floor idea rather than a laboratory one.
The targets are the thick sections that are welded by hand or in many arc passes today: wind turbine towers and foundations, ship hulls and blocks, heavy steel and aluminium structures.
What is not published matters just as much: travel speed, deposition rate, cost per metre, and whether a series machine exists. This is a research record, not a catalogue item.
| Parameter | Value |
|---|---|
| Welding depth, single pass | 14 cm (5.51 in) |
| Previous laser benchmark, single pass | 6 cm (2.36 in) |
| Laser power | 50 kW |
| Beam shaping | BrightLine Weld |
| Ambient pressure | 50 mbar, rough vacuum |
| Process name | Laser welding in a vacuum (LaVa) |
| Partners | TRUMPF and RWTH Aachen University |
| Announced | November 9, 2026 |
| Target work | Wind structures, shipbuilding, heavy steel and aluminium |
| Series machine and pricing | Not stated |
Why it matters for us: 14 cm in one pass changes what a fabricator can bid for, and it changes what a laser welding supplier is asked. Buyers will ask whether a 50 kW source and a vacuum chamber beat their existing laser welding machine on a 30 mm section. Today the honest answer is that the vacuum cell wins on depth per pass and loses on fixture size, because the part has to fit inside the chamber.
3. Lincoln puts physical AI on the welding robot, Comau cuts gun repair to 10 minutes
ASSEMBLY magazine rounded up the new welding hardware on November 18. Three of the items matter to anyone quoting automated welding.
Lincoln Electric's XpertLINC is a physical AI platform. An operator marks the start and end of a weld. The system scans the joint, works out the real gap and fit-up, then builds the robot path and the welding parameters from the customer's own procedure specification.
It keeps correcting during the pass. When the parts vary, the path and the process settings move with them, and parts that fall out of specification are flagged instead of welded.
The saving is the teaching step. Point-by-point programming is why short batches are expensive to automate, and XpertLINC aims at exactly that cost.
Comau's N-WG spot gun is a maintenance story. One body instead of a stack of parts, X and C configurations from the same design, and mounting on the major robot brands. Force repeatability is within plus or minus 20 daN, supply is 380 to 480 V, and average repair time falls from 30 minutes to 10.
The third item is the TIG control layer. New sets let the operator change AC frequency from 50 to 150 Hz, and with it arc stability, heat input, penetration and bead shape. Aluminium and stainless are named as the applications.
| Product | What changed | The number |
|---|---|---|
| Lincoln Electric XpertLINC | Vision, coordinated motion and process control set the path from the customer's welding procedure | Operator marks start and end only, no point teaching |
| Comau N-WG spot gun | Single-body design, X and C configurations, mounts on major robot brands | Force repeatability plus or minus 20 daN, 380 to 480 V |
| Comau N-WG service | Direct access to components instead of a stacked assembly | Average repair 30 min to 10 min |
| Advanced TIG control sets | Adjustable AC frequency and waveform, aimed at aluminium and stainless | 50 to 150 Hz |
Why it matters for us: the programming step is the same wall that keeps small shops away from robotic welding cells, and laser welding cells run into it too. When the scanner and the procedure file do the teaching, the break-even batch drops, and a buyer who used to weld 200 pieces a month by hand starts asking for a cell. That is the conversation our handheld and cabinet laser welding line is in.
4. China's 304 stainless rebounds: Hongwang 2 mm coil 14,400, nickel up 3.75%
Mysteel's weekly survey for November 12 to 18 shows 304 spot prices turning up after a soft October, helped by Shanghai stainless futures and firm production costs.
On November 18 the in-warehouse price of 304/2B Hongwang 2 by 1240 mm cold-rolled coil in Wuxi was 14,400 CNY per tonne, about USD 2,160, including 13% VAT. That is up 200 CNY on the week.
Nickel did the work. Overnight into November 18, LME nickel rose 3.75% to USD 16,455 a tonne and SHFE nickel rose 3.23% to 123,770 CNY. The stainless main contract rose 2.73% to 14,310 and closed at 14,125, up 1.29%.
Spot followed in the morning. Foshan and Wuxi 304 cold and hot rolled gained 150 to 250 CNY a tonne. Foshan 304 hot-rolled five-foot was 13,600 and Delong cold-rolled 13,800, up 50. Zhangpu cold-rolled was quoted at 14,400. 316L moved up as well and some 201 in Zibo added 50.
Then it faded. Dealers raised offers early, downstream buyers held back at the higher level, sellers gave part of the gain back in the afternoon, and deals stayed thin. Mysteel's own summary is blunt: a rally driven by news, with insufficient end-user take-up.
One warning on the numbers. Mysteel quotes several series at once: Hongwang 2 by 1240 cold-rolled in Wuxi, Delong cold-rolled in Foshan, Tsingshan 5 by 1520 hot-rolled. Different brands, widths and cities. Do not read a move across two of them as a single trend.
| Item | Specification | Price | Change | As of |
|---|---|---|---|---|
| 304/2B cold-rolled, Wuxi | Hongwang 2 x 1240 mm, 13% VAT | 14,400 CNY/t (USD 2,160) | +200 on week | Nov 18 |
| 304 cold-rolled, Foshan | Delong | 13,800 CNY/t | +50 on day | Nov 18 |
| 304 hot-rolled, Foshan | Five-foot mainstream | 13,600 CNY/t | Firm | Nov 18 |
| 304 cold-rolled, Zhangpu | Mill offer | 14,400 CNY/t | Up | Nov 18 |
| LME nickel | Three-month | 16,455 USD/t | +3.75% | Nov 18 |
| SHFE nickel | Main contract | 123,770 CNY/t | +3.23% | Nov 18 |
| SHFE stainless | Main contract | 14,310 intraday, 14,125 close | +2.73%, +1.29% | Nov 18 |
Why it matters for us: a nickel-led rally that buyers do not follow usually fades within two weeks, and this one is already showing it in the afternoon pullback. If you are buying stainless steel sheet and pipe for a Q1 build, a 200 CNY move is about 3% of the material cost, which is smaller than a container freight swing. Fix the grade and the width first, then argue the price.
Frequently Asked Questions
Does the Canada-China deal mean Chinese steel and aluminium enter Canada duty free now?
No. Canada's surtax on Chinese steel and aluminium is still in place. What changed is the remission side: the existing remission measures now run two more years to December 31, 2028, and 32 more steel and aluminium items are covered. A remission is granted to a Canadian importer on a named line, so your buyer has to check the item against the list and file. Without that, the duty applies as before.
Is a 14 cm single-pass laser weld something I can buy today?
Not as a machine. The 14 cm result from TRUMPF and RWTH Aachen is a record in laser welding in a vacuum, published on November 9, and it came without travel speed, deposition rate or price. What you can buy today for thick plate is multi-pass laser welding or hybrid laser-arc welding. Treat the record as a direction of travel, not as a quotation.
What does physical AI on a welding robot actually save?
The teaching time, and that is the cost that kills short batches. Lincoln Electric's XpertLINC takes the start and end points of the weld from an operator, scans the joint, and builds the path from the customer's own welding procedure specification. You skip point-by-point programming, and the cell re-scans when the fit-up changes between parts.
Why did 304 stainless rise while carbon steel prices are flat to soft?
They answer to different inputs. Carbon steel follows iron ore and construction demand, and both are weak, with hot-rolled coil at 483 USD on an FOB China basis. 304 follows nickel, and LME nickel jumped 3.75% to 16,455 USD a tonne overnight into November 18. Mysteel reports thin end-user buying behind the stainless move.
Where do I check what a stainless sheet should cost per tonne?
Use a published series, not one phone quote. On November 18, Hongwang 304/2B 2 by 1240 mm cold-rolled in Wuxi was 14,400 CNY per tonne with 13% VAT, while Delong 304 cold-rolled in Foshan was 13,800, so brand, city and width move the number by hundreds of yuan a tonne. Our stainless steel sheet and pipe page lists the grades and finishes we stock, and we quote against the series on the day of the order.
Sources
- Prime Minister of Canada, "Prime Minister Carney advances Canada's strategic partnership with China across trade, commerce, and culture", November 17, 2026
- Steel Market Update, "Canada, China agreement makes room for more Chinese steel", November 18, 2026
- Ministry of Commerce of China, press briefing on the China-Canada economic and trade consultations, November 17, 2026
- Mysteel, "Global plate daily: Canada remission extension a positive; watch Turkish prices", November 18, 2026
- TRUMPF, "World record with a high-power laser: TRUMPF speeds up the welding of thick steel components", November 9, 2026
- ASSEMBLY Magazine, "New welding technologies improve automation, process control and maintenance", November 18, 2026
- Mysteel, "WEEKLY: China's 304 stainless prices rebound", November 19, 2026
- Mysteel, "Stainless daily: nickel news lifts futures, Foshan high offers slow", November 18, 2026
Related Articles
- Laser Industry News November 16 2026: Machine Tool Output Up 19%, US 232 Derivative List Moves, SANY AI Welding Line, Steel Output Down 5.1%
- Stainless Steel Price per Kg in 2026: What Actually Moves the Number
- CBAM and Stainless Steel: The Cost Importers Will Pay in 2026
- Laser Weld Inspection: Acceptance Criteria Buyers Can Enforce
- Fiber Laser Cutting Copper and Brass: Power, Gas and Settings (2026)
