Laser Industry News — November 8, 2026: EU Quotas Bind by Country, US 301 Exclusions End, India Keeps Pipe Duty, TRUMPF Closes Cutlite
Policy moved faster than machines this week. EU steel quotas were 47.4% used by November 3, and the hot-rolled coil quota was already gone for Türkiye, India and Indonesia. In the US, 178 China Section 301 exclusions end at midnight on November 9. India recommended five more years of a $268 per tonne duty on Chinese seamless pipe. TRUMPF closed its Cutlite purchase for up to EUR 21 million. Anyone quoting on last month's assumptions will pay for it.
1. EU steel: the quota binds by country, and CBAM decides who gets in
The Q4 numbers from SMM are the clearest signal so far. By November 3, 37% of the way through the quarter, 47.4% of the overall quota was used. 54 of 283 order numbers were already exhausted.
The total hides the split. Eight HRC order numbers covering Türkiye, India, Indonesia, Vietnam and the two FTA pools hold 0.59 million tonnes and were 97% used. The remaining origins hold 0.99 million tonnes and were 11% used.
Türkiye used its 0.16 million tonne Q4 HRC quota by October 5. India's 0.15 million tonnes went by October 8. The 0.12 million tonne FTA pool went in a single allocation on October 15. That is why about 0.15 million tonnes of Turkish HRC sold for December shipment is timed to reach EU anchorages after January 1, with another 0.45 million tonnes of Turkish steel waiting at port.
The annual HRC quota is 5.20 million tonnes under Regulation (EU) 2026/1384, which has applied since July 1. The EU imported 9.78 million tonnes of HRC in 2025. Across all products the tariff-free volume is 18.3 million tonnes, and the duty above quota is 50%.
Prices moved before the paperwork did. Indian HRC is at USD 730 per tonne CFR North Europe, up from USD 640 in early August. Northwest European domestic is EUR 753 per tonne EXW, about USD 848. The gap narrowed from about USD 190 per tonne to about USD 120.
CBAM is the second layer, and it is bigger than most buyers expect. On default values it adds about EUR 316 per tonne, roughly USD 356, to Indian HRC imported in 2027. A Turkish scrap-EAF coil reported on verified actual emissions pays about USD 20 per tonne. That one number explains the queue at the reset.
| Item | Value | As of |
|---|---|---|
| Q4 quota used | 47.4% of the total, 55.4% of the quarter's own volume | Nov 3, 2026 |
| Order numbers exhausted | 54 of 283 | Nov 3, 2026 |
| Annual HRC quota (1A) | 5.20 Mt against 9.78 Mt imported in 2025 | Reg. (EU) 2026/1384 |
| Duty above quota | 50% | since Jul 1, 2026 |
| Indian HRC, CFR North Europe | USD 730/t, from USD 640 in early August | early Nov 2026 |
| NWE domestic HRC | EUR 753/t EXW, about USD 848 | early Nov 2026 |
| CBAM cost, Indian HRC | about EUR 316/t on default values | 2027 imports |
| CBAM cost, Turkish EAF coil | about USD 20/t on verified actuals | 2027 imports |
Why it matters for us: if you buy stainless or aluminium out of China and ship into the EU, the documents now cost more than the freight. Our stainless steel sheet offer carries the melt-and-pour country and the mill test certificate with the heat number, because those two fields decide your duty and your CBAM bill at the border. Ask for both before you book.
2. US: 178 China Section 301 exclusions end on November 9
USTR's December 2025 notice extended 178 exclusions from the China Section 301 duties through 11:59 p.m. eastern time on November 9, 2026. They sit under headings 9903.88.69 and 9903.88.70.
If your broker claims one of those headings today, the list duty does not apply. From November 10 it does again, at the rate of the list the line is on. As of October 19 no extension notice had been published.
USTR has moved this date before. The same December 2025 notice pushed it from November 29, 2025. Treat it as scheduled, not settled.
Three more dates sit in the same window. On November 10 the suspension of the Section 301 maritime action ends, which brings intermodal chassis, chassis parts and ship-to-shore gantry cranes back in. On December 4 a minimum import price and an extra 15% duty start on polysilicon. On February 9, 2027 a 25% duty starts on the drone components in Annex III.
| Date | What happens | Can it move |
|---|---|---|
| Nov 9, 2026 | 178 China Section 301 exclusions end at 11:59 p.m. ET | Yes, USTR has extended this set before |
| Nov 10, 2026 | Maritime Section 301 suspension ends: chassis, chassis parts, port cranes | Yes, USTR said it would decide before the date |
| Dec 4, 2026 | Polysilicon minimum import price plus an extra 15% duty | Partly, Commerce can adjust by partner |
| Feb 9, 2027 | 25% duty on Annex III drone components | Partly, lower rates possible under clauses (4) and (6) |
Why it matters: for a machine order this is a pricing question, not a policy seminar. Section 301 list rates on machinery lines run 7.5% or 25%, and the list your HTS line sits on decides which one. If a shipment lands after November 9, price the entry both ways before you sign. Our laser cutting machine quote comes with the HTS line written on the invoice so your broker can work the date.
3. India keeps a $268 per tonne duty on Chinese seamless pipe
India's DGTR recommended on October 29 that the anti-dumping duty on alloy and non-alloy steel seamless pipes, tubes and hollow profiles from China stay for another five years, at $268 per tonne.
It was a sunset review, opened on March 26, 2026 after requests from Jindal Saw, Kirloskar Ferrous Industries and Maharashtra Seamless. Their argument was simple: let the duty expire and dumping comes back.
The duty was first imposed in February 2021. The current temporary extension runs out on January 27, 2027. The recommendation now sits with the Department of Revenue at the Ministry of Finance, which issues the notification.
Read the product description before you plan around it. The order is written around seamless products. Welded tube, and tube cut to length from strip, sit in different headings and are priced on different logic.
| Date | Event |
|---|---|
| Feb 2021 | Definitive AD duty imposed at $268/mt |
| Mar 26, 2026 | DGTR opens the sunset review |
| Oct 29, 2026 | DGTR recommends five more years at $268/mt |
| Jan 27, 2027 | Current temporary extension expires |
Why it matters: if you cut seamless tube for hydraulic or structural parts and the billet comes from China, your landed cost into India stays where it is for another five years. Cheap welded tube is not a loophole, it is a different product with different tolerances and an inspector who knows the difference. Our laser tube cutting machine cuts both, so the honest comparison is cost per finished part, not tube price per tonne.
4. TRUMPF closes Cutlite: 80% for up to EUR 21 million, brand stays
TRUMPF completed the purchase of Cutlite Penta's business on November 5 and announced it on November 6. The seller was El.En. S.p.A., which moved the business into Cutlite S.r.l. and sold 80% of that company to TRUMPF International Beteiligungs-SE.
The money is small by machine tool standards. Maximum total consideration is about EUR 21 million, with roughly EUR 13 million paid in cash at closing. The balance depends on the December 31, 2029 accounts. El.En. keeps 20% for three years and books a capital loss of about EUR 4 million.
Cutlite is in Prato, Italy, with around 190 employees. It builds laser systems that cut metal, plastics, wood and die boards.
The strategic part is the brand. TRUMPF says Cutlite stays a separate brand, keeps its own position in the sheet metal market, and will be tied more closely to TRUMPF lasers and the group's global supply chain. TRUMPF also said it will expand Cutlite's presence in Europe and the United States.
For anyone comparing a Chinese fiber machine with a European one, this is the part worth watching. Italian build plus German service behind the same badge changes the resale and service story. It does not change the price gap on a 3 kW or 6 kW machine, which stays wide on comparable formats.
| Item | Detail |
|---|---|
| Buyer | TRUMPF International Beteiligungs-SE, Ditzingen |
| Seller | El.En. S.p.A., Florence, Euronext STAR Milan |
| Stake | 80%, El.En. retains 20% for three years |
| Consideration | up to about EUR 21 m, about EUR 13 m cash at closing, balance against the Dec 31, 2029 accounts |
| Signed / closed | binding agreement August 7, 2026; closing November 5, 2026 |
| Company | Cutlite S.r.l., Prato, Italy, around 190 employees |
| Products | laser cutting systems for metal, plastics, wood and die boards |
| Brand | stays separate, integrated with TRUMPF lasers and supply chain |
Why it matters: we sell against both. A fiber laser cutting machine should be judged on parts per hour, scrap rate and service response, not on the badge. Ask any supplier, European or Chinese, for the local service partner and the spare-part lead time in writing. That answer decides your downtime, and downtime is the one number nobody negotiates.
Frequently Asked Questions
Do EU steel quotas affect a laser machine buyer?
Yes, through the material rather than the machine. Northwest European coil is EUR 753 per tonne EXW, up EUR 30 since early August, and anything above quota pays 50%. If your customer is a European job shop, their material cost decides when they can sign for new capacity.
What changes for US imports after November 9, 2026?
178 China Section 301 exclusions expire at 11:59 p.m. eastern time. From November 10 the list duty returns at the rate of the list the line sits on. List rates on machinery lines are 7.5% or 25%, so have your broker confirm the HTS line and the entry date before you fix a price.
Does India's duty cover laser-cut tube?
The order names seamless pipes, tubes and hollow profiles. Welded tube and parts cut from strip are separate products under separate headings. Check the product description with your importer of record before you assume a classification.
Why is CBAM so much cheaper for Turkish coil?
Because Turkish mills report actual emissions. On default values CBAM adds about EUR 316 per tonne to Indian HRC imported in 2027, while a Turkish scrap-EAF coil on verified actuals pays about USD 20 per tonne. If your supplier cannot give you verified emissions data, you pay the default.
How should I quote a machine when the tariff calendar keeps moving?
Split the quote. Machine FOB or CIF on one line, duty and VAT on another, with the entry date and HTS line written in. Then a change in the calendar is a re-settlement, not a renegotiation. Our fiber laser cutting machine quotes are built that way, and the drawing review comes before the price.
Sources
- Shanghai Metals Market (SMM), "EU quotas bind by country; CBAM decides who gets in", November 5, 2026
- LME Insight, "When Policy Sets the Premium: CBAM, Scrap Curbs and the New Ferrous Spreads", November 5, 2026
- European Commission, "Factsheet: EU steel measure", 2026; Regulation (EU) 2026/1384
- Tariffs API, "U.S. tariff changes coming from November 2026 to February 2027", October 19, 2026 (FR 2025-21671, FR 2026-16400, FR 2026-16979)
- SteelOrbis, "India's DGTR recommends five-year AD duty on Chinese seamless pipes", October 29, 2026
- TRUMPF, "TRUMPF Forms Strategic Partnership with Cutlite", November 6, 2026
- El.En. S.p.A., "El.En. completes the sale to TRUMPF of 80% of the company holding the contributed Cutlite Penta business unit", November 5, 2026
Related Articles
- Laser Industry News November 4 2026: IPG Revenue Up 15%, 60 kW and Automation Lead EuroBLECH, AI Moves Into Motion Control, Stainless Turns Up
- Wobble Welding Head vs Standard Laser Welding: Gap, Speed and Cost (2026)
- Custom Laser Tube Cutting Machine: Jaws, Fixtures and Profiles (2026)
- Laser Cutting Tolerance: Kerf, ISO 2768 and Real Limits (2026)
- Stainless Steel Mill Test Certificate: How to Verify It Before You Pay
